Eternabond 50mm Roofseal White Tape

 

Tape Roll Contents:

50mm (2")  Wide x 15.2 mtrs long.

RoofSeal/OneStep tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. RoofSeal/OneStep seals to itself so it can be cut and folded around an object.

For use on virtually all roofs, RoofSeal/OneStep features a UV stable backing. With the exception of surface prep, RoofSeal/ OneStep is a one-step permanent repair system for virtually all roof types, and roof accessories. RoofSeal/ OneStep creates a waterproof, moisture, and air tight barrier with no additional sealing required. RoofSeal/ OneStep remains flexible to temperatures as low as -57°C making it virtually impossible to thermally shock the seam causing a leak.

RoofSeal/OneStep bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, aged PVC, CSPE/Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, Galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

Technical Data

Adhesion	9 kilos
Application Temperature	66°C to -29°C ambient
Colors	White
Elongation	>700% +/- 100
Low Temperature Flexibility	12.7mm radius at -34.4°C
Permanence	.001 perms maximum
Pliability	No cracks in membrane
Shelf Life	Up to 5 years
Standard Case Quantity	30.5 sq. meters per case
Standard Roll Size	5cm, 10cm, 15cm, 20cm, 30cm x 15.2m
Temperature Flexibility Range	57°C - >93.3°C
Tensile Break PSI	31 (kpa)
Total Thickness	0.9 mils
Water Vapor Test	(ASTME 96B) .005 grms/24

Surface Preparation
Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.