CRC Soft Seal
Long term protection for metal surfaces
CRC Soft Seal is an aliphatic wax-based long term indoor/outdoor corrosion inhibitor for machined surfaces and assemblies subjected to long periods of storage or adverse conditions during shipment. Soft Seal will provide protection of equipment subject to heat, humidity, chemicals or corrosive atmospheres.
Features:
- Seals out moisture and corrosive contaminants
- Forms a dry, transparent, amber film which is highly resistant to humidity, salt water and salt spray.
- Never becomes brittle and will not craze.
- Will not attack plastic, rubber, paint or insulation material.
- Easily removes with CRC Brakleen or mineral spirits.
- Withstands 400 hours of salt spray test
Approvals
- USDA Authorised for use in Federally inspected Meat and Poultry Plants.
- MIL Spec: Mil-C-16173D Grade 4 Mil-C-62218
Physical Properties
| Flash Point (TOC) | 60°C |
| Specific Gravity (20°C) | 0.87 ± 0.05 |
| Viscosity (20°C) | 200-500cP (Thixotropic) |
| Film thickness | 10-50 Micron |
| Coverage (25 Micron) | 20 m²/1 litre) |
| Colour | Amber |
| Removal | Brakleen or Petroleum Solvents |
| Temperature Range | -40°C to 93°C |
| Corrosion Protection (depending on storage conditions) | Up to 1 year outdoors Up to 2 years indoors |
