Supreme Antennas

Key Features of the TRACKER LIGHT Satellite Meter 

• Preset Global Satellite Data Bank

• Input Frequency Range: 950~2150MHz
• Signal field intensity range: 30dBuV-105dBuV
• Measurement Unit: dBmV; dBµV; dBm
• Measurement Accuracy: ±1.5dB
• Input Resistance: 75 ohm
• Symbol Rate: 2Msps-45Msps 
• Connector: F type
• Measurement type: signal strength; bit error rate; S/N
• QPSK switch: automatic identification 
• 22K control: supported
• Audio-output: Speaker
• Display: Code segment wide-temperature LCD
• Memory content: 300 reserved locations for global satellite channels; 100 user-defined channels
• LNB Power Supply: 13V, 18V, <500mA

1. Input port: The port to connect with LNB (Satellite Dish LNB)
2. Output port: When the battery is low, connect this port with input port of satellite receiver, then turn on the receiver to supply power for meter and get signal input.
3. LCD: LCD display with backlight. 
4. Option Key & shift key between default and user-defined channel plans: Single-press, the cursor will move downwards circularly. Hold for 3 seconds, screen will shift between default and user-defined channel plans.
5. Number digit key & backlight key: Single-press: cursor moves left Hold for 3 seconds to turn on or turn off backlight.
6. Number digit key & mute key: Single-press: cursor moves right Hold for 3 seconds to turn on (off) the speaker.
7. Save & delete key: Press to save modified items. Hold for 3 seconds to delete the selected item.
8. Load and unit key Single-press: load parameters in local channel plan to user-defined channel plan. Hold for 3 seconds to shift among the measurement unit’s dBuV, dBmV, dBm.
9. Numeric Keys: Enter numbers from 0 to 9. When cursor is in channel number zone, press any numeric key to start or stop the signal measurement. Hold “0” key for 3 seconds to enter local longitude & latitude modifying mode.
10. POWER: ON/OFF
11. ON/Off Light
12. USB Port
13. Power Input
14. Speaker