No Items selected!

Eternabond Roof Seal Tape Grey

Stock Code: RVO614
Price: NZD$120.00
*

Tape Roll Contents:

50mm Wide x 15.2 mtrs long.
Colour: Grey
 
ROOF & LEAK REPAIR TAPE

RoofSeal/OneStep tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. RoofSeal/OneStep seals to itself so it can be cut and folded around an object.

For use on virtually all roofs, RoofSeal/OneStep features a UV stable backing. With the exception of surface prep, RoofSeal/ OneStep is a one-step permanent repair system for virtually all roof types, and roof accessories. RoofSeal/ OneStep creates a waterproof, moisture, and air tight barrier with no additional sealing required. RoofSeal/ OneStep remains flexible to temperatures as low as -57°C making it virtually impossible to thermally shock the seam causing a leak.

RoofSeal/OneStep bonds to a wide range of surfaces including difficult roof materials such as: EPDM, TPO, aged PVC, CSPE/Hypalon, CPE , SBS, APP modifieds, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, Galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.

Technical Data
Adhesion 9 kilos
Application Temperature 66°C to -29°C ambient
Colours Grey
Elongation >700% +/- 100
Low Temperature Flexibility 12.7mm radius at -34.4°C
Permanence .001 perms maximum
Pliability No cracks in membrane
Shelf Life Up to 5 years
Temperature Flexibility Range 57°C - >93.3°C
Tensile Break PSI 31 (kpa)
Total Thickness 0.9 mils
Water Vapor Test (ASTME 96B) .005 grms/24
 


















 

NOTE: Values are typical performance properties and characteristics based on laboratory testing. This is intended as a guide for comparison purposes and does not constitute a specification or specification range.

 
Surface Preparation

Surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil and grease, etc. with EternaClean or a non residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.

Application
Install RoofSeal/OneStep over the repair area, removing the release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure using your hand or a steel roller to activate bonding process. This material may be applied to clean dry surfaces from 66°C to -29°C ambient.  Treat surface with EternaPrime for installations from 5°C to -29°C ambient.